spec no: dsal3684 rev no: v.6b date: mar/16/2015 page: 1 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000865 3.0mmx1.0mm right angle smd chip led lamp part number: APBA3010YSGC-GX yellow super bright green features z 3.0mmx1.0mm right angle smt led, 2.0mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000 pcs / reel. z moisture sensitivity level : level 3. z tinned pads for improved solderability z rohs compliant. descriptions z the yellow source color devices are made with gallium arsenide phosphide on ga llium phosphide yellow light emitting diode. z the super bright green source color devices are made with gallium phosphide green light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsal3684 rev no: v.6b date: mar/16/2015 page: 2 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000865 selection guide absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APBA3010YSGC-GX yellow (gaasp/gap) water clear 5 8 super bright green (gap) 5 15 140 symbol parameter device typ. max. units test conditions peak peak wavelength yellow super bright green 590 565 nm i f =20ma d [1] dominant wavelength yellow super bright green 588 568 nm i f =20ma ? 1/2 spectral line half-width yellow super bright green 35 30 nm i f =20ma c capacitance yellow super bright green 20 15 pf v f =0v;f=1mhz v f [2] forward voltage yellow super bright green 2.1 2.2 2.5 2.5 v i f =20ma i r reverse current yellow super bright green 10 10 ua v r = 5v parameter yellow super bright green units power dissipation 75 62.5 mw dc forward current 30 25 ma peak forward current [1] 140 140 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. 3. luminous intensity value is traceable to the cie127-2007 compliant national standards. notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v. 3. wavelength value is traceable to the cie127-2007 compliant national standards. 4. excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradatio n or premature failure.
spec no: dsal3684 rev no: v.6b date: mar/16/2015 page: 3 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000865 APBA3010YSGC-GX yellow
spec no: dsal3684 rev no: v.6b date: mar/16/2015 page: 4 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000865 super bright green
spec no: dsal3684 rev no: v.6b date: mar/16/2015 page: 5 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000865 APBA3010YSGC-GX reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsal3684 rev no: v.6b date: mar/16/2015 page: 6 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000865 packing & label specifications APBA3010YSGC-GX terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datas heet. if customer usage exceeds the specified limits, kingbright will not be resp onsible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
